DTECH DT-7004B VGA to HDMI HD Converter Instructions

The DTECH DT-7004B VGA to HDMI Converter seamlessly converts VGA input to HDMI output, supporting video resolutions up to 1080p. It also includes an audio input, allowing you to transmit both video and audio through a single HDMI cable. This converter is ideal for connecting older computers, laptops, and other VGA-equipped devices to HDMI displays, such as TVs and monitors.

Features

1. VGA to HDMI Conversion: Converts analog VGA signals to digital HDMI, providing compatibility between older devices and modern displays.
2. High Resolution: Supports video resolutions up to 1080p for clear and detailed video output.
3. Audio Support: Includes a 3.5mm audio input to combine audio with video over the HDMI output.
4. Plug and Play: Simple setup with no need for additional software or drivers.
5. Compact Design: Small and lightweight for easy portability and installation.

Specifications

• Input Ports: 1 x VGA, 1 x 3.5mm Audio
• Output Port: 1 x HDMI
• Supported Video Resolution: Up to 1080p @ 60Hz
• Power Supply: USB-powered (5V)
• Operating Temperature: 0°C to 60°C (32°F to 140°F)
• Storage Temperature: -20°C to 70°C (-4°F to 158°F)
• Humidity: 20% to 90% RH (non-condensing)
• Dimensions: 60mm x 55mm x 20mm (2.36in x 2.17in x 0.79in)
• Weight: Approx. 100g (3.53oz)

Instructions for Use

1. Connections

1. Powering the Device:
   • Connect the provided USB power cable to the power port on the converter.
   • Plug the other end of the USB power cable into a USB power source (e.g., a USB port on your computer or a USB power adapter).
2. Connecting VGA Source:
   • Connect one end of a VGA cable to the VGA output port on your source device (e.g., computer or laptop).
   • Connect the other end of the VGA cable to the VGA input port on the converter.
3. Connecting Audio Source:
   • If you want to transmit audio, connect one end of a 3.5mm audio cable to the audio output port on your source device.
   • Connect the other end of the audio cable to the 3.5mm audio input port on the converter.
4. Connecting HDMI Display:
   • Connect one end of an HDMI cable to the HDMI output port on the converter.
   • Connect the other end of the HDMI cable to the HDMI input port on your display device (e.g., TV or monitor).

2. Operation

1. Power On:
   • Ensure all connections are secure and turn on your source device and display.
   • The converter will automatically begin converting the VGA signal to HDMI.
2. Adjust Settings:
   • Adjust the resolution settings on your source device to match the supported resolutions of your display for optimal performance.
3. Troubleshooting:
   • If there is no display output, check all cable connections.
   • Ensure the power supply is adequate and the converter is receiving power.
   • Verify that the display is set to the correct HDMI input.

Package Contents

• 1 x DTECH DT-7004B VGA to HDMI HD Converter
• 1 x USB Power Cable
• 1 x User Manual

The DTECH DT-7004B VGA to HDMI HD Converter provides an efficient solution for connecting VGA-equipped devices to HDMI displays, ensuring high-quality video and audio transmission for a variety of applications.